|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3285||Genuine Swiss Clone 3285 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Bezels||Bi-directional Rotating||Bi-directional Rotating||Fixed||Fixed|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Series||Gmt Master Ii|
Watch Case: 316L. Our case is made of 316L steel, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Luminiscence: Hands and Markers. About the luminosity of the watch is hands and markers. With this watch, you will lose your time in dark.
Bezel Material: Stainless Steel. Stainless steel bezel is a material that has high dimensional stability, high resilience and UV resistance. It can be used in both hard and soft cases. It’s also resistant to water, heat and deliquescent substances like oil or food.
Water Resistance: 30 meters. As for the waterproof depth of the watch, it is 30 meters that is enough for no worries. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Clasp: Deployment. The clasp design of the watch which makes it more convenient for you to wear the watch, and the appearance is more beautiful.
Band Material: 316L. Our band is made of 316L. For daily seawater corrosion, 316L steel is completely sufficient.
Case Back: Solid. The tough bottom cover, solemn, practical, and not flashy, can consolidate one’s position and not follow the trend.
Second Markers: Minute Markers around the outer rim. The design of the second marker is a small round dial, placed on the outside of the watch to indicate the time.
Crystal: Sapphire Crystal. Sapphire crystal is a good choice, because sapphire has higher impact resistance, air tightness and hardness than other materials, and the processing cost is also high, so it is mostly used in top watch brands. Tips: The A Replica is applied with mineral glass instead of sapphire.
Dial Markers: luminous dot. We can use a watch with luminous dots, which is a new type of sensor that can detect time in the dark. When receiving a signal from an external source, this point will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.