|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Bezels||Bi-directional Rotating Time-Lapse||Bi-directional Rotating||Fixed||Fixed|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
Bezel Material: Stainless Steel. The watch uses a high-end stainless steel bezel, which has been around since ancient times. It has been used as a decorative material for watches and clocks for more than two thousand years. A watch face made from stainless steel bezel materials can withstand extreme temperatures.
Case Back: Solid. watch commonly use solid bottom covers, which can allow you to use longer and keep the watch longer.
Band Material: 316L. The band is 316L daily seawater corrosion, this kind of steel is sufficient.
Second Markers: Minute Markers around the outer rim. The design of the dial is also known as the hands of the clock. This design element is used in many well-known designs.
Clasp: Fold Over Clasp. The clasp design of the watch to make it easier and quicker for the user to open and fold the case over to keep it secure.
Water Resistance: 30 meters. A good waterproof of the watch has been applied, it is 30 meters. But please make sure you close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Luminiscence: Hands and Markers. The design of the watch’s luminiscence is hands and markers. With this watch, you will not waste time to check the real-time.
Watch Case: 316L. A good case can better protect your watch. 316L steel is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Crystal: Sapphire Crystal. As a good replica watch, we use a very high hardness, the Mohs hardness is as high as 9, second only to diamond, its hardness is almost 3 times that of mineral glass, 20 times that of acrylic mirror. Tips: The A Replica is applied with mineral glass instead of sapphire.
Dial Markers: Arabic Numeral. These arabic numerals in the watch are used as a markers to indicate what time it is.